Standard P Bass Pickup Set
Click To Enlarge

Dragonfire STANDARD P BASS Pickup Set
1 P Bass Split Pickup
Brand New Matched 4 String P-Bass Pickup Passive Precision Set

~~DESCRIPTION~~
The Split P Bass Pickups in this Dragonfire Standard Passive P Set are great for all-around P-Bass performance. These excel in the low to midrange while still allowing for high end response, adding nice dimension and versatility to your playing. The eight-pole design (4 each split) on these single-coil wax potted P Pickups will work for your fretted or fretless 4-string bass. Wax potting on the pickups helps isolate sound and reduce feedback or other undesirable noise.

Featuring ceramic magnets and flat-top pole pieces to provide better balance and output across the strings, these produce roughly 8.6K (approximate) output. Each pickup comes wired with a white (hot) wire and black (ground) wire plus red pickup connection wire (roughly 6” in length). These precision-style pickups are single-coil split for two distinct pickups wound opposite from each other. This wiring allows for more even tonal capability and balanced sound along with reduced hum. These are great for big, substantial playing styles with the thickness and thump you need in most styles of play.

Bass pickup dimensions have varied over time so be sure to check your cavity and available space with the approximate measurements for these pickups (provided below).

~~HIGHLIGHTS~~
*Brand New Set of Standard P-Bass Passive Split Pickups
*Works with 4-String Bass Guitars
*Ceramic Magnet Style
*Wax Potted Pickups
*Adhesive Backing on Pickup Pad (for easier installation; one side of each pad)
*Mounting Screw Head Type: Phillips Pan Style Head (not counter-sunk)

~~APPROXIMATE MEASUREMENTS~~
*Output: 8.6K DCR (Resistance)
*Flat Top Polepiece Spacing: 30.6mm
*Overall Pickup Length: 72mm (57mm excluding screw flanges)
*Overall Pickup Width: 27.6mm
*Overall Pickup Depth/Height: 14.4mm
*Pickup Screw Flange Spacing (center:center): 65mm
*Pickup Pad Measurements: 39.5mm x 18.2mm x 13.5mm
*Overall Mounting Screw Length: 37.5mm
*Mounting Screw Head Diameter: 4.2mm
Measurements provided are approximations; variability is to be expected.

~~WHAT’S INCLUDED~~
*1 P Bass Split Pickup Set
*2 Foam Pickup Pads
*4 Pickup Mounting Screws (your choice of color)
Nothing else is included. Supplementary images may be provided for additional reference and comparison purposes only.

~~PURCHASE NOTES~~
Instructions for installation are NOT included. Due to the vast and varied nature of possible set-ups, we do not provide specific information or diagrams for installation. You should be able to use basic knowledge of wiring with the diagram or instructions of your choice. Installation requires soldering. We do not provide technical or any other type of support for installation, configuration, modification, or use of this item. Note that we do not recommend installation using power tools as these can put too much force on the product and cause damage. Do not purchase if you are unsure of your ability to successfully complete installation.

ALLOW & EXPECT variation in color due to photo and monitor settings as well as natural product variance.

CONTACT US PRIOR TO PURCHASE if you have any questions or concerns regarding color, pattern, fit, materials, installation requirements, compatibility with your instrument, measurements provided, or anything else.

  • Item #: 2101

Standard P Bass Pickup Set 4String PBass SplitPickup ColorChoice

Price: $29.95
* Marked fields are required.
Qty: *
Reviews (1) Write a Review
No Reviews. Write a Review