Prewired HSS Pickguard - Featuring Dragonfire Brown Buckers & Area 52 AlNiCo Pickups, Loaded Pickguard Triple Pickup (Humbucker Single Single) Wired Guard, Choice of Colors, Styles & Wiring Options
Click To Enlarge

Dragonfire Brown 52 Prewired HSS Pickguard
Humbucker Single Single SSH Loaded Pickguard
Mixed Pickup Build, Strat Pickguard

Brown Bucker Bridge Pickup, Passive A5 Humbucker
Area 52 Middle Pickup, Passive A2/A5 Single Coil
Area 52 Neck Pickup, Passive A2/A5 Single Coil

Your Choice of Pickup and Guard Colors
Your Choice of Wiring Options & Upgrades

~~Product Description~~
For this build, Dragonfire Brown Buckers offer the chance to “get some” in the best possible way and when paired with our Area 52 Single Coils, you can really find that late 70’s, early 80’s sound you crave. These pickups match up well to deliver big, brown sound while still rounding out the bottom end and delivering at the high end. Area 52 Single Coil Strat pickups feature the multifaceted benefits of Alnico 5 magnet performance for your Bass Strings and Alnico 2 performance for your Treble Strings. Together, this mixed set will allow for great play in almost every classic rock genre.

This loaded guard is prewired on a Humbucker-Single-Single Standard Strat Pickguard cut for one humbucker at the bridge & one single coil at both the middle and neck. Our guards feature a shielded electronics area and are designed to fit USA & Mexican (2002 & Newer) Fender Standards. This build is available in many colors/styles with a variety of personalization and upgrade options. Your selections and any addition of effects or upgrades will determine ultimate layout/functionality and may, at our discretion, necessitate substitution of component styles depending on options chosen. Let us know if you have any questions regarding options or selections.

~~Guard Information~~
*Customized Prewired HSS Pickguard
*Fender® Replacement SSH Guard
*Standard USA & MEX/MIM 2002 & Newer Style Fit
*Extensive Pickguard Color Choices Available
*Guard Color Samples Found HERE
*Choice of Right-Handed or Left-Handed Guards
*Choice of Guard Mounting Styles
*Choice of Standard or Floyd Rose Bridge / Trem Cut
*Protective Film Surface Cover (remove after install)
*Fully Shielded Electronics Area (shape/color may vary)

~~Bridge Pickup Details~~
*Passive Humbucker Output: ~11.7K
*AlNiCo V (Alnico 5) Bar Magnet Style
*4 Wire Humbucker (Coil Split Capable)
*Bridge Polepiece Spacing: 52mm
~~Middle Pickup Details~~
*Passive Single Coil Output: ~5.9K
*AlNiCo 2 (GBE) & AlNiCo 5 (EAD) Magnet Style
*2 Wire Single Coil
*Reverse-Wound Reverse-Polarity (RWRP)
*52mm Standard String Spacing
~~Neck Pickup Details~~
*Passive Single Coil Output: ~5.9K
*AlNiCo 2 (GBE) & AlNiCo 5 (EAD) Magnet Style
*2 Wire Single Coil
*52mm Standard String Spacing

~~Build Information~~
*Built for 6-String Standard Guitars w/ Standard Spacing
*Vacuum Wax Potted Pickups for Squeal Reduction
*Full-Size 500K Pots (large/long unless your other selections require a different style)
*Choice of Standard or CTS Upgraded Pot Style
*.047 Cap(s) Standard
*5-Way Sealed Style Switch Comes Standard
*Choice of Control Styles & Upgrades
*Coil Split Options
*Optional Wiring & Effect Upgrades
Wiring upgrade option information can be found on our store’s Prewired landing page. Onboard effects and circuit information can be found HERE.

For your control pots, choose the quantity and positioning you prefer. Check our prewired landing page for more information on control options and descriptions if needed.
Pot position options include (see the provided image):
*P1 – Position #1 – Standard Strat Volume Hole Position
*P1.5 – Position #1.5 – Slight Offset between P1 and P2
*P2 – Position #2 – Standard Strat Middle Tone Position
*P2.5 – Position #2.5 – Slight Offset between P2 & P3
*P3 – Position #3 – Standard Strat Bottom Tone Position
*P4 – Position #4 – Offset (additional routing may be required)

~~Installation Information~~
No diagrams are included. Your loaded guard will come with three open wires. Red is hot and is soldered to the tip of your jack. If you select a jack, this will be pre-done for you, so you’ll unsolder, feed the wires through your channel and resolder. Jacks work with standard cables only and jack sockets accept standard ¼” plugs. Both blacks are grounds. One is soldered to the jack sleeve and the other is grounded to your trem/bridge. If your selections require alternate installation, additional instructions will be included in your shipment.

Take your time for installation; do not use power tools and do not over-tighten screws or other components. If you are unsure of your ability to successfully install this item, please do not purchase. Contact us with any questions or special requests. We’re happy to help if possible! Message us directly at contact@dragonfireguitars.com.

~~Purchase Notes~~
Please check your needs for product compatibility and ask any questions prior to purchase.

Buyers assume all risk of use; sales are only offered to those competent to safely and lawfully purchase and use items.

Allow and expect variation in color due to photo and monitor settings as well as natural product variance. Color, sound, performance or other descriptions are subjective as well as generic in nature. Your outcome will vary based on many factors, most importantly your own skill, style, equipment and experience. Color descriptions indicate color only, not material. We do not recommend purchasing if you are looking for a particular outcome or are trying to match an existing color/theme on your guitar.

Your selections are your own – we will create your guard to order per your specifications so please know your needs prior to purchase.

Depending on your set-up, you may require adjustment. Ask in advance and we are happy to provide fit/compatibility information or make special arrangements if possible. Do not buy if you are unsure of your requirements, needs, or ability to make any required adjustments.

These guards will not fit anything other than specifically noted compatible models and will not work with non-standard components or systems. Guards are not guaranteed to fit “Squiers” and will not fit “Deluxe” “Light” any Artist Series or Reissue, or anything else other than “Fender® Standard” model guitars in the years and configuration noted. Non-standard selections may require body modifications.

  • Style: Dragonfire HSS Prewired / Loaded Guard
  • Pickguard: Custom Designed and Cut SSH Wired Pickguard
  • Pickup Style: Dragonfire Brown Bucker + Area 52 Single Coils
  • Color: Choice of Pickguard and Pickup Colors
  • Fit: 2002 & Newer US & MIM Fender Standard
  • Features: Humbucker Single Single Guitar Pickups & Loaded Guard
  • Type: Mixed AlNiCo Magnet Styles (A2 & A5), Smooth & Warm Performance
  • Attribute: Late 70's, Early 80's Brown Sound for Classic Rock
  • Item #: 10718

Prewired HSS Pickguard, Loaded Brown 52 AlNiCo Mix

Price: $144.95
* Marked fields are required.
Qty: *
Reviews (0) Write a Review
No Reviews. Write a Review