HS Humbucker Single Pickguard, Angled Humbucker SH Guard, Color Choice
Click To Enlarge

Angled Humbucker - Single Strat Guard
HS / SH Strat Pickguard
Humbucker-Single Guard
Angled Bridge Humbucker Rout Style
Choice of Colors
Choice of Control Styles

~~ITEM DESCRIPTION~~
This Humbucker-Single pickguard is cut for one angled humbucker at the bridge and a standard single coil at the neck. Be sure your body routing will accept the pickup placement associated with this guard. We offer your choice of pot hole control locations as well as switch options. 

Custom Guards – see the link in the Related Items section at the bottom of the page – are available if you need something unique.

~~PRODUCT HIGHLIGHTS~~
*Fender® Replacement Pickguard
*11 Hole Standard Mounting Pattern
*Protective Film Surface Cover (remove carefully after install)
*Aluminum Shielded Electronics Area (shape & color may vary)
*Fender Standard USA & MEX/MIM 2002 & Newer Style Fit
*Beveled Guard Edging

Check the product images for general reference and options. Click the images to enlarge as needed. Click this link to see each guard color in more detail if desired. Ask any questions prior to purchase as custom orders are non-returnable and non-refundable.

Overall Style of Guard
*Your choice of right or left-handed / lefty guard style.

Guard Color/Style
*Follow this link to see our guard colors in more detail.
*Most guards are cut from 3-ply standard pickguard materials with a beveled edge (some exceptions). Layers may vary (impacts side edging color only) at our discretion.
*Mirror guards are made from an acrylic material designed to protect the mirror finish and will reflect your unique surroundings. Trans, clear, mirror, sparkle, shimmer, smoke, plexi, fluoro & other specialty style sheets are specialized fabrications, not standard pickguard materials.
*Most guards come with pre-applied aluminum shielded electronics area (shape & color may vary). Specialty colors/styles may have single or double-sided protective covering without aluminum shielding so we include a separate sheet of shielding with each purchase of this style so you can choose whether/how to apply it.
*Allow and expect color and pattern variation due to photo and monitor settings as well as natural product variance. Sample images provided represent the color, pattern, or shading of these pickguards, but will not be an exact match. Specialty colors are particularly difficult to capture/show true images. We do not recommend purchasing if you are looking for a particular outcome or are trying to match an existing color/theme on your guitar. We want you to be completely satisfied with your custom pickguard and thank you for understanding that we cannot guarantee a specific look.

Bridge / Trem Cut Options
*Choose from standard or Floyd Rose cut styles or select “None (uncut)” if you do not wish to have a trem space routed.

Pickup Opening Options
*Choose square or rounded corner for your bridge humbucker rout style.
*Rounded Corner Humbucker Cut Pickguards will not work with covered or active pickups. Be sure to select the “Squared Corner” style of pickup rout for covered, active or other larger pickup use.

Control Options
*None (uncut/undrilled, do-it-yourself)
*Standard Blade Style Switch Cut (standard/blade/knife style)
--Choice of Countersunk SRV style or Standard Mounting Holes
*Up to 3 Mini Switches
*Gibson Style Toggle Switch Hole (standard or So-Cal position)
*Root Style
--Note that Root Style toggle switch selection is not available with pot hole positions 2, 2.5, or 3.
*A reference image is provided to give general locations for all options.

Pot Hole Positions
*We can send these custom guards without any pot holes (undrilled so you can drill how and where you like) or with pot holes drilled in the position of your choice. Please check out the provided reference image for general hole placement options. Select “YES” if you want a hole drilled in the position indicated and “NO” if you do not want a hole in that position. If you do not want any pot holes drilled, simply select “NO” on every Pot Hole Position Option.
--P1 – Position #1 – Standard Strat Volume Hole
--P1.5 – Position #1.5 – Slight Offset between P1 and P2
--P2 – Position #2 – Standard Strat Middle Tone
--P2.5 – Position #2.5 – Slight Offset between P2 & P3
--P3 – Position #3 – Standard Strat Bottom Tone
--P4 – Position #4 – Offset
*IMPORTANT NOTES
--Position #4 may not fit in all Strat routs and additional routing may be required with this selection.
--Pot holes are compatible with full-size or mini-pots.
--Be sure to check your control option selections and compatibility with pot hole selections/placement.
--Positions # 1.5 & 4 are not recommended to be selected for the same build as there would not be enough space for standard pot placement.
--We will drill as you select. Some hole placements will not be compatible with certain routing or may be too closely positioned for standard knob sizes. It is solely your responsibility to determine and select your desired hole placements. Ask questions prior to purchase as needed.

Pickguard Mounting Screws
*Select this option to include mounting screws for your new guard.

~~WHAT’S INCLUDED~~
*1 Pickguard
NOTHING ELSE is included.

~~PURCHASE NOTES~~
These guards will not fit anything other than specifically noted compatible models. They will not work with non-standard components or systems and may not work with some pickup covers/styles. Guards will not fit “Squier” “Deluxe” “Light” any Artist Series or Reissue, or anything else other than “Fender® Standard” model guitars in the years and configuration noted. Reference images are approximations and not to scale; variability is to be expected. Images provided are representations only. Non-standard selections may require body modifications. Your selections are your own – we will create your guard to order per your specifications.

Check measurements before purchase. Depending on your set-up, you may require adjustment. Ask in advance and we are happy to provide fit/compatibility information or make special arrangements if possible. DO NOT PURCHASE if you are unsure of your requirements, needs or ability to make any required adjustments for your newly custom designed guard.

THERE ARE NO RETURNS OR ORDER CANCELLATIONS ON CUSTOM ORDERS! Since we process orders as quickly as possible and each guard will be cut just for you, be sure of what you want and ask any questions before completing your purchase. This item is not eligible for return. It is solely your responsibility to know what you need/want and what options will work for your set-up.

Buyers assume all risk of use; sales are only offered to those competent to safely and lawfully purchase and use items.

Allow and expect variation in color due to photo and monitor settings as well as natural product variance.

Ask any questions regarding colors, materials, options, measurements, installation, requirements, special requests, etc. prior to purchase.

Note that we do not recommend installation using power tools as these can put too much force on the product and cause damage. Take your time for installation; do not use power tools and do not over-tighten screws or other components. If you elect to drill or cut your own controls or holes, please be aware that some guards are extremely difficult to drill yourself if you do not have experience or proper tools. This is especially true for mirror, clear, sparkle and specialty color/style materials.

Any use, modification or damage to a guard invalidates your ability to make a return.

  • Style: Stratocaster Pickguard, Humbucker-Single
  • Pickguard: Custom Strat Guard, Angled Humbucker
  • Color: Choice of Colors
  • Fit: US & MIM 2002 & Newer Fender Standard
  • Features: Customizable / Build to Order Design
  • Type: Pickguards Made to Order / Custom Pickguard
  • Item #: 10440
  • Cannot ship to: Canada

HS Pickguard, Angled Humbucker - Single Guard, Choice of Colors

Price: $19.95
* Marked fields are required.
Qty: *
Reviews (0) Write a Review
No Reviews. Write a Review