Active Jazz Bass Bridge Pickup
4-String J Bass Active Pickup
Active Pickup Style ~ Choice of Cover & Screw Colors

The Dragonfire Active Jazz Bass Pickups in this Jazz Pickup category provide hot active output and clarity with the sound isolating and low interference performance typically associated with an active pickup. These noiseless jazz pickups excel in the midrange while still allowing for high-end response, freer vibration, and low-end thump, adding a nice dimension to your playing. The design on these single-coil J Pickups works for your fretted or fretless 4-string bass. Wax potting on the coils and an epoxy seal on the pickups help isolate sound, increase noise suppression, and reduce feedback as well as other undesirable output.

Featuring ceramic magnets, better balance, increased sustain and output across the strings, these Active Jazz Pickups are a must-have for the serious player. Better performance maintenance regardless of volume level along with reduced overtone and balanced signal conversion make these pups stand out in the crowd. If you want less hum, more snap, clean signal and sharpness, look no further! Each pickup comes with a colored (hot) wire, black (ground) wire, and battery wire. This pickup is also available in a set for savings and convenience.

Bass pickup dimensions have varied over time so be sure to check your cavity and available space with the approximate measurements for these pickups (provided below).

~~Product Highlights~~
*Brand New J-Bass Active Pickup
*For 4-String Bass Guitars
*Bridge Position Use
*Ceramic Magnet Style
*Wax Potted Pickup Components
*Epoxy Sealed Pickup
*These are ACTIVE pickups and require a 9v battery (not included)
*Noiseless (Please note that noise and interference can come from sources other than your pickup!)
*Adhesive Backing on Pickup Pad

~~Approximate Measurements~~
*Length: 95mm (Bridge)
*Width: 30mm (19mm excluding screw flanges)
*Depth/Height: 23mm
*Bridge Mounting Screw Spacing: 40mm x 24mm
*Pickup Pad Measurements: 64mm x 14mm x 13mm
*Mounting Screws: 4.2mm (Head Diameter) & 37.5mm (Length)
Measurements provided are approximations; variability is to be expected. Ask any questions regarding options, measurements, installation, requirements, special requests, etc. prior to purchase.

~~What’s Included~~
*1 Jazz Bass Bridge Pickup
*Pickup Mounting Screws
*J Bass Pickup Foam Cushion Pad
*1 Battery Clip
*BASIC Wire Color Codes
Nothing else is included. Any extra images are provided for additional reference and comparison purposes only.

~~Purchase Notes~~
ASK ANY QUESTIONS PRIOR TO PURCHASE. Buyers assume all risk of use; sales are only offered to those competent to safely and lawfully purchase and use items. Allow and expect variation in color due to photo and monitor settings, perception, lighting, as well as natural product variance.

Basic wire color codes will let you know which wires are hot and which are grounds as well as the most basic of connections. Due to the vast and varied nature of possible set-ups, we do not provide specific information or diagrams for installation. You should be able to use the simple information we provide to match up with any diagram or instructions you choose to use. Detailed instructions for installation are NOT included. You should be able to use basic knowledge of wiring with the diagram or instructions of your choice.

Installation requires soldering and compatible system. We provide enough pickup lead wire to complete installation wiring in standard usage situations. If you require additional length, let us know PRIOR to purchase. Take your time for installation; do not use power tools and do not over-tighten or apply too much pressure on components.

Inspect your order upon receipt. We will address any issues PRIOR to installation. If everything is in order upon receipt, simply install carefully to enjoy.